The SA3600TG is a wide-range spectrum analyzer covering 9 kHz to 3.6 GHz, featuring ultra-low noise measurement, a 10.4" display, and a built-in tracking generator for complete RF signal and component testing. It enables accurate frequency, bandwidth, and amplitude analysis for communication and microwave applications.
Frequency Range from 9kHz up to 3.6 Ghz.
160 dBm Displayed Average Noise Level.
10.4 inches display.
3.6 GHz Tracking Generator.
On-board Relay and opto-coupler.
10Hz Minimum Resolution Bandwidth (RBW).
Frequency
Range : 9KHz to 3.6 GHz
Resolution : 1 Hz
Display : TFT LCD, 10.4 inches
Frequency Span
Range : 0 Hz , 100 Hz to Maximum frequency ofdevice
Accuracy : 0 span / ( swept points-1 )
Frequency Counter
Resolution : 1Hz, 10Hz ,100Hz, 1Khz
Bandwidth
Resolution bandwidth (-3 dB) : 10 Hz to 500 kHz ( in 1 to 10 sequence) , 1MHZ,3MHzo
Video bandwidth (-3 dB) : 10Hz to 3MHz
Amplitude measurement range : -130 dBm to +20dBm,
Tracking generator
Output frequency range : 100kHz to 3.6 Ghz
Output power level range : -30dBm to 0dBm
Output power level resolution : 1dB
Output flatness : +/- 3dB
Input and Outputs
Front panel RF input connector : 50 ohm, N-type female
Front panel track generator output : 50 ohm, N-type female
10M reference input : 50 ohm, N-type female
Communication Port
USB HOST, USB DEVICE, LAN, earphone port, REF and VGA.
