Technology Labs
RFL-RFGD: 3GHz RF Generator and Detector
About Product
The RFL-RFGD is a high-stability RF generator and detector supporting up to 3 GHz, offering multiple modulation modes (AM/FM/PSK), S-parameter measurement, and PC-based control. It enables practical analysis of filters, couplers, impedance, and VSWR for RF and microwave experimentation.
3GHz Synthesized RF Generator and Detector
Internal and External Frequency Modulation
High Stability and Low Phase Noise
Wide Power Range from -30dBm to +0dBm
Dynamic Range –50dBm to +10dBm
Frequency Stepping 1MHz
S-Parameters Measurement
Analysis of Filters Response
Both Standalone and PC interface
1dB Insertion Loss Directional Coupler
Highly Reliable
Frequency : 35MHz to 3GHz
Frequency Resolution: 1MHz
Modes: Single tone, Frequency sweep, Frequency hopping, Power sweep
Freq Sweep for Full Span: ≤ 3.8 sec
Frequency Offset: ±100 Hz
Sub Harmonics : 50 dBc/Hz
Phase Noise : 80 dBc/Hz at 800MHz
Power Max: 0 dBm up to 1.5 GHz,
-10dBm at upto 3GHzPower Min: -30dBm
Power Resolution : 0.5dB
Detector dynamic range : -50dBm to 10dBm
Modulatio : AM,FM,PSK
AM Modulation Range : 100MHz to 2.8GHz
FM Modulation Range : 300MHz to 1GHz
LCD display : 128x64 graphics display
Interface : USB B type
Impedance: 50 Ohms
RF type Port: SMA type female
Size: 170mmx292mmx100m
Measurement: Insertion Loss
User Interface: Standalone and PC based control
Software: compatible with Win XP Win 7,Win Vista
Directional Coupler
Frequency Range: 20 to 3000 MHz
Number of Port: 3
Measurement: Return Loss, VSWR Impedance
Min VSWR Detection: 1.18:1
Impedance: 50 ohm
Minimum Return Loss (S11): -30 dB
Power Handling: 1W
Directivity: 20 dB
Determination of Power division characteristics (S21,S31)
Measurement of Insertion Loss and Isolation for directional Coupler (S21,S41)
Determination of 3dB Bandwidth of BPF filter
Determination of 3dB cut off frequency of HPF and LPF filter
Measurement of attenuation power for Pi attenuator
Determination of insertion loss (S21) and harmonics for Microstrip Ring Resonator
Measurement of transmission and isolation characteristics of Circulator
Impedance and VSWR measurement of transmission using directional coupler
NOTE: RFL-MCT is required to perform the above set of experiments
With 35 years of legacy in Technical Education, Akademika extends its expertise to Defence and Skill development, building Innovative, Reliable Training Systems for the next generation of Learners.
Partner with Akademika
Join leading institutions that trust our engineering to Advance Learning and Research.
