Technology Labs
RFL-MCT- A-3G: Advanced Microstrip Component Trainer (3GHz)
About Product
The RFL-MCT-A-3G is a robust microstrip RF trainer supporting up to 3 GHz, designed for practical study of active and passive components, including MMIC amplifiers, VCOs, mixers, filters, couplers, and RF switches. It enables complete RF subsystem design with real-time S-parameter and performance characterization for hands-on microwave engineering learning.
Frequency Range up to 3GHz
Dedicated Boards for both Active and Passive Microstrip Components
Gold plated PCB for superior performance
Robust and Integrated Board
Analysis of Active & Passive Device characterization
RF System design
Highly Reliable
MMIC Amplifier
Frequency range from 100MHz to 3GHz
Gain at 15 dB at 2GHz (Typical)
Noise Figure at 2.9 dB at 3GHz
Reverse Isolation at 20 dB (typical)VCO
Frequency range from 1200MHz to 3000MHz
Power Output at 8 dBm (typical)
Tuning Voltage range from 0.5V to 10VFrequency Mixer
RF/ LO Frequency range from 1200MHz to 3000MHz
LOPower IN at +7 dBm
IFOut range from DC to 1000MHz
Conversion Loss at 6.3 dB (typical)
Isolation at 20 dB (typical)Loaded Line Phase Shifter
Micro strip Filters
LPF
Frequency Range from 100MHz to 2GHz
InsertionLoss < 1.5 dBHPF
Frequency Range of 1.9GHz (3dB cut-off ±50MHz)
Insertion Loss < 1.5 dBBPF
Center Frequency at 2GHz (±50MHz)
Bandwidth from ~ 300MHz at 3 dB & ~ 800MHz at 30 dBBRF
Center Frequency at 1.8GHz (+/- 50 MHz)
Bandwidthfrom ~ 850MHz at 3 dB & ~ 400MHz at 25 dBAttenuators
Tee Attenuator at 5 dB
PiAttenuator at 10 dBCouplers
Coupled Line Directional Coupler
Center Frequency at 2GHz
Couplingat 13 dB
Isolation > 20dBBranch line Coupler
Center Frequency at 2.45GHz (± 50MHz)
Isolation> 25dBRate Race Coupler
Center Frequency at 2.45GHz (±50MHz)
Isolation> 25dBRing Resonator
Center Frequency at 2.45GHz (±50MHz)
Bandwidth at 60MHzCirculator
Frequency at 2.45GHz
Power Divider
Frequency range from 500MHz to 3GHz
Isolation > 20dBTransmission Line Terminations / Loads
OPEN Termination
SHORT Termination
MATCHED Load
MISMATCHED LoadPin Diode Switch
SPSTSwitch Frequency range from 300MHz to 1GHz
SPDTSwitch Frequency range from 1GHz to 2GHz
Insertion loss < 3dBPin Diode Variable Attenuator
Frequency range from 1.5GHz to 2.5GHz
Attenuationrange from 7dB to 17dB
VariableVoltage from 0V to +5VSchottky Diode Detector
Frequency range from 2.2GHz to 2.5GHz
PIN Modulator
Frequency from 1GHz to 3GHz
Gain Measurement of MMIC Amplifier
PIN Diode Modulator Investigations
Characterization of Circulator
Characterization VCO
Characterization RF Mixer
Characterization of Schottky Diode Detector
Determination of insertion loss (S21) of Microstrip Ring Resonator
Measurement of Isolation Characteristics of Circulator
Measurement of Attenuation Power for Pi Attenuator
Determination of Power Division Characteristics (S21,S31)
Measurement of Isolation of Directional Coupler (S41)
Determination of 3dB Bandwidth of BPF Filter
Determination of 3dB cut off Frequency of LPF Filter
Characterization of PIN Diode as RF Switch
Study High Frequency Modulation
Study of RF To DC Conversion
With 35 years of legacy in Technical Education, Akademika extends its expertise to Defence and Skill development, building Innovative, Reliable Training Systems for the next generation of Learners.
Partner with Akademika
Join leading institutions that trust our engineering to Advance Learning and Research.
